Embedding Accessories
ATLANTIC POLY INC 2X2 NYLON BAGS 2 MIL 1000/CS
This item has a minimum order quantity of 6000 rolls per supplier requirements.
Electron Microscopy Sciences Aluminum Base Mold, 50 x 50 x 30 mm
This extra large square base mold offers optimal thermal conductivity. Features a well polished surface for easy block removal. It will accommodate most samples.
Electron Microscopy Sciences Mold for Cell Culture
This mold is designed primarily for embedding cell culture specimens grown either directly on the bottom of a dish or on the filter when cross sections of the cells are needed. Cells grown on petri dishes are cut into strips just before the propylene oxide dehydration step; when Propylene Oxide is added, the strips lift right off the bottom. When the strips are ready for embedment, they are rolled on an applicator stick into a wad and gently lowered into the well (the strips should not float).
Advatages
Many cells can be examined in cross section.
There is no need for trimming.
The curved side makes the tip very strong in spite of its thinness.
Easy detection of a strip of cells.
The label is placed on the round part so as not to interfere with the specimen.
24 cavities.
Cary Company Size #3, 75 Micron - Nylon Monofilament Mesh Liquid Filter Bag, Plastic "P" Flange Ring (NMO75P3P-A), Available for Purchase in Increments of 50.
The 21WM43 is a 75 Micron size #3 (4.12" x 8") Nylon Monofilament Mesh Iiquid filter bag with plastic ring. These nylon mesh bags are a single strand mesh designed for economical use and suitable for applications using vessel or open filtration systems. Industries that would need liquid filter bags consist of chemical, food, paper, petroleum, adhesives, paints and many others. Autoseam construction creates a seam inside of the filter.
Electron Microscopy Sciences Paraffin TMA Arraymold Kit C, Blue, 4.0 mm diameter, 15 cores per mold Capacity
The Arraymold is the simple tool for laboratories to perform Paraffin tissue microarrays (TMAs) w/ less time while maintaining excellent results. Process up to 150 specimens onto one single slide w/ very little time consuming, minimal technical training. The DVD instruction is accompanying w/ each kit, will step by step guide you to perform through the entire TMAs process. Arraymolds allow pathologist or researcher to view many different samples on the same single slide. Helpful in finding IHC markers for control or quality assurance from hundreds of samples. Staining markers will be more consistent when hundreds of samples are on one slide. Used less costly antibody.Arraymold kit is small enough to be stored in a drawer.Rubber arraymold can be reused many times without losing its flexibility. This mold generates 4 mm diameter sample core, 15 cores per mold. Kit: 10 Disposable 4mm sterile dermal needles, 2 Stylets, 1 Brass Plate, 1 4mm reusable rubber Arraymold, DVD.Color: Blue
Electron Microscopy Sciences Paraffin TMA Arraymold Kit 2 (A +C), 2.0 and 4.0 mm diameter
The Arraymold is the simple tool for laboratories to perform Paraffin tissue microarrays (TMAs) with less time while maintaining excellent results. Process up to 150 specimens onto one single slide with very little time consuming, minimal technical training. The DVD instruction is accompanying with each kit, will step by step guide you to perform through the entire TMAs process.
Arraymolds allow pathologist or researcher to view many different samples on the same single slide.
Helpful in finding IHC markers for control or quality assurance from hundreds of samples.
Staining markers will be more consistent when hundreds of samples are on one slide.
Used less costly antibody.
Arraymold kit is small enough to be stored in a drawer.
Rubber arraymold can be reused many times without losing its flexibility. This package includes two Arraymold kits, Kit A and Kit C.
Diameter: 2.0 and 4.0 mm
Electron Microscopy Sciences Paraffin TMA Arraymold Kit 2 (B +C), 1.5 and 4.0 mm diameter
The Arraymold is the simple tool for laboratories to perform Paraffin tissue microarrays (TMAs) with less time while maintaining excellent results. Process up to 150 specimens onto one single slide with very little time consuming, minimal technical training. The DVD instruction is accompanying with each kit, will step by step guide you to perform through the entire TMAs process.
Arraymolds allow pathologist or researcher to view many different samples on the same single slide.
Helpful in finding IHC markers for control or quality assurance from hundreds of samples.
Staining markers will be more consistent when hundreds of samples are on one slide.
Used less costly antibody.
Arraymold kit is small enough to be stored in a drawer.
Rubber arraymold can be reused many times without losing its flexibility. his package includes two Arraymold kits, Kit B and Kit C.
Diameter: 1.5 and 4.0 mm
Leica Biosystems D-Formalizer Powder - Aldehyde Neutralizer for Spent Formalin, 10 x 680 g
D-Formalizer is a powdered aldehyde neutralizer for histology laboratories that treats spent formalin and 4% glutaraldehyde, producing a clear, non-odorous solution suitable for disposal. It simplifies chemical waste handling by neutralizing aldehydes and minimizing solids that can clog drains; one packet is formulated to treat approximately one gallon of used fixative.
- Neutralizes spent formalin and 4% glutaraldehyde
- Produces a clear solution free of solids and aldehyde odor
- Simplifies hazardous waste handling and disposal
- Single-packet dosing treats about one gallon of used fixative
- Powdered form mixes easily for quick treatment